Modelling of Soil Displacement Resulting from Sweep during Tillage Operation Using Image Processing

Document Type : Original Research

Authors
J. Massah 1
H. Etezadi 1
B. Azadegan 2
S. R. Hassan-Beygi 1
1 Department of Agrotechnology, College of Abouraihan, University of Tehran, Tehran, Islamic Republic of Iran.
2 Department of Irrigation and Drainage, College of Abouraihan, University of Tehran, Tehran, Islamic Republic of Iran.
Abstract
The study of soil particles displacement through the passage of a tillage blade can lead to an appropriate geometrical design of soil-engaging tools, which can reduce the energy consumption required for tillage. In this study, soil displacement by a conventional sweep was measured and modelled. The sweep had a cutting width equal to 150 mm, and it was tested in an indoor soil bin containing a loam soil with 5.5% moisture content (dry basis) at a working depth of 50 mm and a travel speed of 0.133 m s-1. Five pins with different colors were placed at the soil surface with a certain order in front of the sweep to model the interaction of soil and the soil-engaging part of the sweep. The pins movements were tracked for 10 seconds from the moment they were in touch with the sweep using a CCTV camera installed above the sweep. Experimental results showed a general trend of the highest displacements around the center of the path of sweep, reducing at further distance away from the center. The measured lateral displacement ranged from -167 to +71 mm due to the displacements of the pins. Furthermore, a polynomial equation was fitted to the path of each pin. The extremum of these equations indicated the highest soil displacement in the paths. The method presented in this study can be used in designing problems where agricultural engineers can study the effects of sweeps with different geometries on the trend of soil translocations during the tillage.

Keywords

Subjects

Barr, J. B., and Fielke, J. M. (2016). Discrete element modelling of narrow point openers to improve soil disturbance characteristics of no-till seeding systems. In 2016 ASABE Annual International Meeting (p. 1). American Society of Agricultural and Biological Engineers, Paper No. 162460906.
Bogunovic, I., and Kisic, I.(2017). Compaction of a Clay Loam Soil in Pannonian Region of Croatia under Different Tillage Systems. J. Agr. Sci. Tech. 19: 475-486.
Gürsoy, S., Chen, Y., and Li, B. (2017). Measurement and modelling of soil displacement from sweeps with different cutting widths. Biosyst. Eng. 161 (1):1-13.
Hasimu, A., and Chen, Y. (2014). Soil disturbance and draft force of selected seed openers. Soil Till. Res. 140 (1):48-54.
Hemmat, A.(2009). Reduction in Primary Tillage Depth and Secondary Tillage Intensity for Irrigated Canola Production in a Loam Soil in Central Iran. J. Agr. Sci. Tech. 11: 275-288.
Kushwaha, R. L., and Shen, J. (1995). Finite element analysis of the dynamic interaction between soil and tillage tool. T. ASAE 38 (5):1315-1319.
Lindstrom, M. J., Nelson, W. W., Schumacher, T. E., and Lemme, G. D. (1990). Soil movement by tillage as affected by slope. Soil Till. Res. 17 (3-4):255-264.
Liu, J., Chen, Y., and Kushwaha, R. L. (2010). Effect of tillage speed and straw length on soil and straw movement by a sweep. Soil Till. Res. 109 (1):9-17.
Liu, J., and Kushwaha, R. L. (2006). Modeling of soil profile produced by a single sweep tool. CIGR J. 8 (1):1-13
Novák, P., Hůla, J., and Kumhálová, J. (2016). Translocation of soil particles at different speed of tillers. In Proceedings of 6th International Conference Trends in Agricultural Engineering, 7-9 September 2016, Czech Prpublic (pp. 433-437).
Rahman, S., Chen, Y., and Lobb, D. (2005). Soil movement resulting from sweep type liquid manure injection tools. Biosyst. Eng. 91 (3):379-392.
Sharifat, K., and Kushwaha, R. L. (1997). Soil translocation by two tillage tools. Can. Agr. Eng. 39 (2):77-84.
Sharifat, K., and Kushwaha, R. L. (1999). Lateral soil movement by tillage tools. In 1999 ASAE Annual International Meeting (p. 1). American Society of Agricultural Engineers, Paper No. 991003.
Sharifat, K., and Kushwaha, R. L. (2000). Modeling soil movement by tillage tools. Can. Agr. Eng. 42 (4):165-172.
Sibbesen, E., Andersen, C. E., Andersen, S., and Flensted-Jensen, M. (1985). Soil movement in long-term field experiments as a result of cultivations I. A model for approximating soil movement in one horizontal dimension by repeated tillage. Exp. Agr. 21 (2):101-107.
Solhjou, A., Fielke, J. M., and Desbiolles, J. M. (2012). Soil translocation by narrow openers with various rake angles. Biosyst. Eng. 112 (1):65-73.
Solhjou, A., Desbiolles, J. M., and Fielke, J. M. (2013). Soil translocation by narrow openers with various blade face geometries. Biosyst. Eng. 114 (3):259-266.
Solhjou, A., Fielke, J. M., Desbiolles, J. M., and Saunders, C. (2014). Soil translocation by narrow openers with various bent leg geometries. Biosyst. Eng. 127 (1):41-49.
Tollner, E. W., Verma, B. P., and Cheshire, J. M. (1987). Observing soil-tool interactions and soil organisms using X-ray computer tomography. T ASAE 30 (6):1605-1610.
Ucgul, M., Saunders, C., and Fielke, J. M. (2017a). Discrete element modelling of tillage forces and soil movement of a one-third scale mouldboard plough. Biosyst. Eng. 155 (1): 44-54.
Ucgul, M., Saunders, C., and Fielke, J. M. (2017b). Discrete element modelling of top soil burial using a full scale mouldboard plough under field conditions. Biosyst. Eng. 160 (1):140-153.
Zhang, J. H., Lobb, D. A., Li, Y., and Liu, G. C. (2004). Assessment of tillage translocation and tillage erosion by hoeing on the steep land in hilly areas of Sichuan, China. Soil Till. Res. 75(2), 99-107.
Znova, L., Melander, B., Lisowski, A., Klonowski, J., Chlebowski, J., Edwards, G. T., Kirkegaard Nielsen, S. and Green, O (2017). A new hoe share design for weed control: measurements of soil movement and draught forces during operation. Acta Agr. Scand. B - S. P. 68 (2):139-148.
Journal of Agricultural Science and Technology
Volume 22, Issue 2
March and April 2020
Pages 415-424