Volume 11, Issue 2 (2009)
JAST 2009, 11(2): 125-136 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Bakhtiari M R, Loghavi M. Development and Evaluation of an Innovative Garlic Clove Precision Planter. JAST 2009; 11 (2) :125-136
URL: http://jast.modares.ac.ir/article-23-1533-en.html
URL: http://jast.modares.ac.ir/article-23-1533-en.html
1- Department of Biological and Agricultural Engineering, University of Putra Malaysia, Serdang, Malaysia.
2- Department of Mechanics of Agricultural Machinery, Shiraz University, Shiraz, Islamic Republic of Iran.
2- Department of Mechanics of Agricultural Machinery, Shiraz University, Shiraz, Islamic Republic of Iran.
Abstract: (7246 Views)
In this study an innovatively designed tractor-mounted, ground-wheel driven, triple unit, row crop precision planter capable of planting three rows of garlic (Allium sativum L.) cloves on each raised bed was designed, fabricated and tested. The major components of this planter include; chassis and transport wheels, lister-bedder unit, seed hopper, seed metering drum, sweeper, knocker, seed tube, furrow openers and seed coverers. The me-tering drums and sweepers are driven by two ground wheels through a chain drive sys-tem. Laboratory evaluation of the planter components, especially the seed metering mechanism revealed a satisfactory performance of the planter components, except a few modifications which were needed before conducting field tests. The performance parame-ters measured/calculated during the field tests included: seeding mass rate, seeding depth, seed spacing, miss index, multiple index and seed damage. The results showed that the new machine is capable of planting 220,000 plants ha-1 at the seeding depth and spacing of 12.3 and 22.7 cm, respectively. Also, miss index, multiple index and seed damage were measured as 12.23, 2.43 and 1.41 percent, respectively.
Subject:
Agricultural Machinery
Received: 2010/01/25 | Accepted: 2010/01/25 | Published: 2010/01/25
Received: 2010/01/25 | Accepted: 2010/01/25 | Published: 2010/01/25
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |