Volume 22, Issue 2 (2020)
JAST 2020, 22(2): 415-424 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Massah J, Etezadi H, Azadegan B, Hassan-Beygi S R. Modelling of Soil Displacement Resulting from Sweep during Tillage Operation Using Image Processing. JAST 2020; 22 (2) :415-424
URL: http://jast.modares.ac.ir/article-23-18284-en.html
URL: http://jast.modares.ac.ir/article-23-18284-en.html
1- Department of Agrotechnology, College of Abouraihan, University of Tehran, Tehran, Islamic Republic of Iran. , jmassah@ut.ac.ir
2- Department of Agrotechnology, College of Abouraihan, University of Tehran, Tehran, Islamic Republic of Iran.
3- Department of Irrigation and Drainage, College of Abouraihan, University of Tehran, Tehran, Islamic Republic of Iran.
2- Department of Agrotechnology, College of Abouraihan, University of Tehran, Tehran, Islamic Republic of Iran.
3- Department of Irrigation and Drainage, College of Abouraihan, University of Tehran, Tehran, Islamic Republic of Iran.
Abstract: (2281 Views)
The study of soil particles displacement through the passage of a tillage blade can lead to an appropriate geometrical design of soil-engaging tools, which can reduce the energy consumption required for tillage. In this study, soil displacement by a conventional sweep was measured and modelled. The sweep had a cutting width equal to 150 mm, and it was tested in an indoor soil bin containing a loam soil with 5.5% moisture content (dry basis) at a working depth of 50 mm and a travel speed of 0.133 m s-1. Five pins with different colors were placed at the soil surface with a certain order in front of the sweep to model the interaction of soil and the soil-engaging part of the sweep. The pins movements were tracked for 10 seconds from the moment they were in touch with the sweep using a CCTV camera installed above the sweep. Experimental results showed a general trend of the highest displacements around the center of the path of sweep, reducing at further distance away from the center. The measured lateral displacement ranged from -167 to +71 mm due to the displacements of the pins. Furthermore, a polynomial equation was fitted to the path of each pin. The extremum of these equations indicated the highest soil displacement in the paths. The method presented in this study can be used in designing problems where agricultural engineers can study the effects of sweeps with different geometries on the trend of soil translocations during the tillage.
Keywords: soil displacement
tillage sweep
soil displacement model
soil-tool interaction
image processing
Article Type: Original Research |
Subject:
Agricultural Machinery/Biosystems Engineering
Received: 2018/03/30 | Accepted: 2019/04/10 | Published: 2020/03/1
Received: 2018/03/30 | Accepted: 2019/04/10 | Published: 2020/03/1
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |