AU - Momenzadeh, L. AU - Zomorodian, A. AU - Mowla, D. TI - Applying Artificial Neural Network for Drying Time Prediction of Green Pea in a Microwave Assisted Fluidized Bed Dryer PT - JOURNAL ARTICLE TA - mdrsjrns JN - mdrsjrns VO - 14 VI - 3 IP - 3 4099 - http://jast.modares.ac.ir/article-23-11035-en.html 4100 - http://jast.modares.ac.ir/article-23-11035-en.pdf SO - mdrsjrns 3 ABĀ  - Drying characteristics of green pea (Pisum satium) with an initial moisture content of 76% (db) was studied in a fluidized bed dryer assisted by microwave heating. Four drying air temperatures (30, 40, 50 and 60ºC) and five microwave powers (180, 360, 540, 720 and 900W) were adopted. Several experiments were conducted to obtain data for sample moisture content versus drying time. The results showed that increasing the drying air temperature resulted in up to 5% decrease in drying time while in the microwave-assisted fluidized bed system, the drying time decreased dramatically up to 78.8%. As a result, addition of microwave energy to the fluidized bed drying is recommended to enhance the drying rate of green pea. Furthermore, in this study, the application of Artificial Neural Network (ANN) for predicting the drying time (output parameter) was investigated. Microwave power, drying air temperature, and green pea moisture content were considered as input parameters for the model. An ANN model with 50 neurons was selected for studying the influence of transfer functions and training algorithms. The results revealed that a network with the logsig (Log sigmoid) transfer function and trainrp (Resilient back propagation; Rprop) back propagation algorithm made the most accurate predictions for the green pea drying system. In order to test the ANN model, the root mean square error (RMSE), mean absolute error (MAE), and standard error (SE) were calculated and showed that the random errors were within and acceptable range of ±5% with a coefficient of determination (R2) of 98%. CP - IRAN IN - LG - eng PB - mdrsjrns PG - 513 PT - YR - 2012