Volume 17, Issue 3 (2015)
JAST 2015, 17(3): 601-613 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Wang S, Dorr G J, Khashehchi M, He X. Performance of Selected Agricultural Spray Nozzles using Particle Image Velocimetry. JAST 2015; 17 (3) :601-613
URL: http://jast.modares.ac.ir/article-23-10081-en.html
URL: http://jast.modares.ac.ir/article-23-10081-en.html
1- College of Engineering, China Agricultural University, Beijing 100193, People’s Republic of China.
2- The University of Queensland, School of Agriculture and Food Sciences, Gatton, QLD 4343, Australia.
3- The University of Queensland, School of Mechanical and Mining Engineering, St Lucia, QLD 4072, Australia.
4- College of Science, China Agricultural University, Beijing 100193, People’s Republic of China.
2- The University of Queensland, School of Agriculture and Food Sciences, Gatton, QLD 4343, Australia.
3- The University of Queensland, School of Mechanical and Mining Engineering, St Lucia, QLD 4072, Australia.
4- College of Science, China Agricultural University, Beijing 100193, People’s Republic of China.
Abstract: (6689 Views)
The aim of the present study was to investigate the influence of nozzle configurations on spray drift and explain the influences using several atomization characteristics (length of spray sheet, spray angle, velocity distribution of flow field, fluctuation of velocity, and droplet size). Nozzles manufactured by one company (Lechler GmbH, Germany) were tested by spraying local tap water in a wind tunnel at an operating pressure of 0.3 MPa and under room temperature. The nozzles tested were compact air-induction flat fan nozzles (IDK120-02, IDK120-03), standard flat fan nozzles (ST110-02, ST110-03), and hollow-cone swirl nozzles (TR80-02, TR80-03). The atomization process was recorded using a Particle Image Velocimetry (PIV) system, droplet size was measured by a Sympatec Helos laser-diffraction particle-size analyzer, and spray drift was evaluated in a wind tunnel with deposition measured using a calibrated fluorometer (Turner-Sequoia model 450). Results showed that spray drift was significantly different among nozzle types (P<0.0005) and that nozzle configurations influenced breakup length, spray angle, droplet size, and velocity. Nozzles producing larger droplet sizes had lower velocity. Smaller droplets were produced when longer and wider spray sheets were produced. Compared to ST and TR nozzles, IDK nozzles started to breakup in the center of the liquid sheet, producing droplets with larger diameter, lower velocity, and less velocity fluctuation. The IDK nozzle is a good choice for low spray drift at higher wind speeds.
Article Type: Research Paper |
Subject:
Agricultural Machinery
Received: 2014/04/14 | Accepted: 2015/03/4 | Published: 2015/05/1
Received: 2014/04/14 | Accepted: 2015/03/4 | Published: 2015/05/1
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |