Volume 11, Issue 4 (2009)
JAST 2009, 11(4): 377-389 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Afzalinia S, Roberg M. An Extended Octagonal Ring Transducer for the Compression
Chamber of a Large Square Baler. JAST 2009; 11 (4) :377-389
URL: http://jast.modares.ac.ir/article-23-11928-en.html
URL: http://jast.modares.ac.ir/article-23-11928-en.html
1- Department of Agricultural Engineering Research, Agricultural Research Center of Fars Province, Zarghan, P. O. Box: 73415-111, Shiraz, Islamic Republic of Iran.
2- t
2- t
Abstract: (7640 Views)
An extended octagonal ring (EOR) transducer was designed and developed to measure forces inside the compression chamber of a large square baler in different directions. The transducer was calibrated by applying forces in three directions simultaneously and independently. The sensor revealed excellent linearity along with small cross sensitivities. Horizontal and vertical primary sensitivities of the sensor were 1,479.7 and 1387.8 μVkN-1V-1, while horizontal and vertical cross sensitivities were 0.64 and 2.85% of the sensor primary sensitivities, respectively. The sensor was used to measure the forces inside the compression chamber of a large square baler in different directions.
Keywords: Calibration, Cross sensitivity, Extended octagonal ring, Force transducer, Large square baler
Subject:
Agricultural Machinery
Received: 1970/01/1 | Accepted: 1970/01/1 | Published: 2009/11/24
Received: 1970/01/1 | Accepted: 1970/01/1 | Published: 2009/11/24
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |